Frequently Asked Questions By Customers of Bottle Blow Molding Machine

Investing such a huge amount of money in a bottle blow molding machine is usually a commitment many people consider very dicey.

For this reason, some customers go the extra mile to ask a few questions that seeks to give them a clearer understanding of what they are investing in.

With this, we can say that such questions is usually worth it, as it tends to unmask some myths and misconceptions a buyer may have about a particular bottle blow molding machine.

So, in case you also find yourself in similar situation, here are some frequently asked questions buy customers and their answers to guide you in making an informed decision in your investment.

1. How many bottles can your blowing equipment produce each hour?

The FG-4 has a capacity of 6500 BPH, the FG-6 has a capacity of 9000 BPH, and the FG-8 has a capacity of 12000 BPH.

This speed is based on a 500ml, 17gram round water bottle bottle. The speed of the machine is  directly by the volume and weight of the bottles.

2. What is the maximum bottle capacity that your blowing machine can produce?

Particularly, FG-4 and FG-6 are ideal for bottles ranging from 200ml to 2000ml, while FG is suitable for bottles ranging from 200ml to 750ml.

3. Can your blowing machine blow any type of bottle neck?

Absolutely, the blowing machine can blow 3025 neck, 2925 neck, 1810 neck, 1881 neck, and 38 neck.

4. What is the blowing machine's installation power and actual power consumption?

 The installation power of the FG-4 and FG-6 is 56 KW, and the actual power consumption is 23-25 KW per hour.

While the installation power of the FG-8 is 112 KW, and the actual power consumption is 46-50 KW/h.

5. Can you recommend an auxiliary machine for your blowing machine?

6m3/min, 30bar air compressor, and 2 sets of 5HP chiller are required for FG-4. Also, 8m3/min, 30bar air compressor, and 2 sets of 5HP chiller are required for FG-6, and 10m3/min, 30bar air compressor, and 2 sets of 5HP chiller are required for FG-8.

We don't require a low-pressure air compressor because our blowing machine is servo operated.

6. Can you tell me how your blowing machine saves energy?

 Our blowing machine is equipped with a very compact heating oven, and the heating head in the oven has been reduced to 38.1mm. Which allows us to save a significant amount of energy.

Furthermore, as stated earlier, because our blower is servo driven, we do not require a low-pressure compressor, allowing us to save even greater amount of energy.

7. How can I avoid the neck becoming soft during the heating process?

The bottleneck has already been provided with fan cooling. With this, you wont run into any problem of your bottle neck being soft in the process of heating.

8. How long do you think you'll need to change the mold?

We have simplified the mold area and made it simple to replace the mold it takes our engineers 17 minutes to change the mold. However, an untrained engineer may take 20-30 minutes. Despite the fact that we are half the time as other suppliers.

9. How does your cam connection system benefit you?

The cam connection system is beneficial to us because the cam linking system is controlled by a single servo motor.

We can guarantee that different activities such as mold opening, mold closing, bottom mold raising, and bottle sealing may be completed in a single movement, which ultimately reduces the blowing circle.

10. Can you tell me how your mold differs from others?

Our mold has a connected structure, which allows for high precision treatment and quick changes.

The material used is aluminum 6061, which has the advantages of quick cooling, light weight, and ease of disassembly.

The mold's surface has been anodized oxidatoin treated, which makes it more robust and extends its service life.

11. What are the bottle sizes that the FG series blowing machine can handle?

The FG series can handle 100ml to 2L, depending on the neck finish you choose.

12. Why is this machine's power so low, and is it enough to produce such high speeds and well-shaped bottles?

We  have updated the heating zone and reduced the distance between preforms to enable for more obs to be heated at the same time, increasing heating efficiency. Yes, achieving such speed and well-shaped bottles is more than enough.

13. What is the total number of servos? What happened to them?

Categorically, there are three servo motors: one for preform pitch change.

While the second one is for preform-taken-into-mold movement (this servo is synchronized with bottle-take-out mold movement).  And finally, the third, and  the largest, is the mold close and open servo.

14. What is the maximum speed that your machine can achieve?

We primarily use three models. In a series, there are four cavities, six cavities, and eight cavities, with capacities ranging from 6000 to 12000 BPH.

In need of a premium bottle blow molding machine?

Having a bottle blow moulding machine is important for packaging and manufacturing aesthetic bottle necks.

Do reach out to us to get your own machine for your bottling industry, and we will be glad to partner with you.